ANTE User Manual

Set Up Performance

Before the first evaluation cycle can run, Ante has to know who works in which section, who reports to whom, which job grade each person holds, how the form is scored, who may see salaries and how results are released. This tutorial sets all of that up once, for one scenario, explains every field on the way, and ends with what Ante can already work out for each employee.

Before You Start

The scenario: Demo Company prepares its FY2026 evaluation of the Creative Studio, a department of eight people. Lena Vargas (Creative Director) heads it. Marco Reyes (Senior Designer) reports to Lena. Six designers report to Marco: Ana Lim, Ben Cruz, Carla Diaz, Dan Ocampo, Elisa Tan and Felix Go. HR also has three people who act in the later tutorials: Hana Ortiz (Performance HR), Rosa Villanueva (prepares salaries) and Gerald Mendoza (approves salaries).

  • You need the Performance configuration permissions (access, create, update) and, for the grades, the permission to edit Job Grades.
  • The departments and roles come first: Settings › Departments, then Settings › Roles. This tutorial only checks them.
Info

Every figure comes from the same functions the screens use, with the standard form's tables. When the tutorial says "Ana has 3 years in grade", that is her job-grade history counted to the end of the review period, 31 December 2026.

Set up Performance, step by step
8 steps
  1. 1. Check the departments, roles and Reports-to lines
  2. 2. Set up the job grades and their Performance attributes
  3. 3. Give every employee a job grade
  4. 4. Performance Settings: people and org, visibility, defaults for a new cycle
  5. 5. Performance Settings: reminders, bell curve and promotion
  6. 6. Performance Settings: salary and release
  7. 7. Load the evaluation form and the preset lists
  8. 8. Give people the right permissions, and (optionally) load existing data
1Check the departments, roles and Reports-to lines

Performance has no org chart of its own. It reads the one Ante tree: a person's section is their department, the head of a department is the one person who holds its top role, and a person's 1st evaluator is their Reports-to, the 2nd evaluator is that person's Reports-to. Open HR → Settings → Organization. The three numbered cards at the top show the order: Departments, then Roles (Positions), then this page.

1 · Departments (Settings › Departments)
Create Creative Studio. The department's name is what the section shows in every cycle.
2 · Roles (Settings › Roles)
Give the department a top role, Creative Director, and lower roles, Senior Designer and Designer, each reporting to the one above. The person holding the department's top role is its head (Lena). If two people hold the top role, the department has no head and the cycle warns you.
Reports-to (on each employee)
Marco reports to Lena; each designer reports to Marco. That chain decides who evaluates whom.
Employee1st evaluator2nd evaluator
Ana, Ben, Carla, Dan, Elisa, FelixMarco ReyesLena Vargas
Marco Reyes(none: Lena is his only evaluator, so she takes the final slot)Lena Vargas
Tip
An employee with no Reports-to, or whose boss sits in another department, shows up in Fix in Resolution Center on Performance Settings. Fix those before the cycle opens.
Organization: the set-up order and the employees with their job grades
  1. 1Departments first
  2. 2Then Roles (Positions)
  3. 3Then job grades and employees, here
2Set up the job grades and their Performance attributes

Open the Job Grades tab. In a company with no grades, click Load Standard Ladder: it creates GS1 to GS3 (General Staff), MM1 to MM3 (Middle Management) and MG1 to MG3 (Management) with standard attributes. Click a row to change its attributes. The full list of fields is on Job Grades; these are the ones the evaluation reads.

Job stageGeneral Staff · Middle Management · Management
A promotion that crosses a stage is flagged as needing an assessment on the Promotion view.
Technical title / Corporate title
The titles shown on the row, for example Sr. Software/Design Engineer · Officer.
Minimum years before promotion0 to 50
How long a person should stay in the grade before a promotion is considered.
Promotion method
For example Promotion Assessment Activity. A grade with a method is flagged for assessment.
1st selection / 2nd selection (years in grade)years
The years in the grade at which a person enters the first and the second selection. The Evaluation sheet and the Promotion view group people by it.
Promotion ratio (count per year / % of headcount)
A reference line on the Promotion view, never a cap. When both are set the count wins.
Target weight / Competency weightpercent, always totalling 100
The legacy split between targets and competencies; the second follows the first.
Hiring budget rate
Only for people who see hiring salaries; leave blank if you do not budget by grade.
What the grade tables do to one person: years in grade → base rank and selection (grade GS3)
Years in grade at 31 Dec 2026Base rankSelection
0nonenone
1Cnone
2B1st selection
3B2nd selection
4B3rd selection or later
The standard form gives a base rank of B from 2 years and C from 1 year, and the GS grades select at 2, 3 and 4 years. The row marked current is Ana Lim (GS3 since 1 April 2023).
The Job Grades tab after Load Standard Ladder
  1. 1Load Standard Ladder
  2. 2GS1: title, years to promote, selection years, weights
3Give every employee a job grade

Go back to the Employees tab and click Assign on a row (or Assign Employee at the top). A person without a grade gets no evaluation sheet unless the cycle takes "No grade", and has no years in grade.

Employee*
Who gets the grade (preset when you use the row's Assign).
Job grade*
One of the grades from step 2; the list shows the grades linked to the employee's role first.
Effective from*date
The day the grade starts. The previous grade ends the day before. Use the real start date: years in grade are counted from it.
Note
Optional, for example a promotion reference.
What Ante works out for Ana Lim from her grade history
Job grade at the end of the review periodSince 1 April 2023GS3
Review period ends31 Dec 2026
Whole years in the gradeCounted to the end of the review period, never to today=3
Base rank (2 or more years)→B
Selection (GS3: 1st at 2, 2nd at 3, 3rd at 4 years)→2nd selection
The same three columns, Years in grade, Base rank and Selection, appear on every row of the Evaluation Center.
Warning
Change a grade with a new effective date; do not edit the old one. Career Design builds each sheet's career history from this history.
Employees tab: grade and Assign on every row
  1. 1Assign Employee
  2. 2Assign or Change on one row
4Performance Settings: people and org, visibility, defaults for a new cycle

Open HR → Performance → Settings (or More ▾ › Performance Settings on a cycle). Sections 1 to 3 are the ones to set before the first cycle. Each one says when it applies: Applies to new cycles (copied onto a cycle when it is created) or Applies now, including running cycles.

Org chart readinessread only
How many people sit in a section and have a Reports-to line. Fix in Resolution Center opens the people to fix.
Section levela department level · default: deepest named level
What is ranked together. Creative Studio is a top-level department, so the section is the department.
Evaluators go up toapplies to new cycles · default: the head of the person's department
How far up the chain evaluation goes. Here Lena, the head of the department, is the last evaluator.
Employees can open their own sheetswitch · default off · applies now
On: every employee opens their own evaluations without a Performance permission. Leave it on for a company where staff fill their own targets.
Who sees scores before releaseEvaluators on the sheet and HR · HR only
Scores someone may not see show as "Hidden" in the Evaluation Center.
Default evaluation form / Default stages for a new cycle
The form and stage list a new cycle starts with: Target setting, 1st half, 2nd half, then the fixed Evaluation, Ranking, Result talks and Closed.
Info

A section's head is frozen on every sheet when the cycle opens, so changing a department head later does not move an open cycle.

People and Org: readiness, section level, evaluators, and the self-service switch
  1. 1Readiness: people in a section and with a Reports-to
  2. 2Section level
  3. 3Evaluators go up to
  4. 4Employees can open their own sheet
5Performance Settings: reminders, bell curve and promotion

Sections 4 to 6 decide how a cycle is chased, how ranks are spread and how promotions are counted.

Count someone as behind fromdays · default 7
Days before a stage deadline from which a person counts as behind. Each cycle copies it.
Automatic reminders / Remind this many days before
Each Performance to-do is a task in the My Tasks of the person whose turn it is. When on, Ante reminds them once, that many days before the stage date.
Target share per level (S A B C D E)percent, must total 100 · default 10 / 20 / 40 / 20 / 10 / 0
The company's bell curve. Save stays off until the shares total 100. A form can set its own.
Warn when a level is over target by more thanpeople · default 0
0 warns on any overage.
Split the company promotion quota across sections by headcount / Rounding of section shares
Default for new cycles. Round up and warn rounds each share up; Largest remainder never adds up to more than the company quota.
Lowest grade for a promotion trackthe standard form uses MM2
The Ranking refuses a promotion track below it.
Promotion approval
Built-in (HR names the approvers) or one of the company's workflows.
What the default bell curve means for a section (guideline per rank)
People in the sectionSABCDE
7 (Creative Studio, FY2026)123210
10124210
20248420
10010204020100
Each share is rounded up, so for 7 people the guideline adds up to 9. It is a guide, not a limit: the Bell Curve page marks a rank that has more people than the guideline.
Ranking and Bell Curve: the target share per rank
6Performance Settings: salary and release

Sections 7 and 8 control who handles salaries and how results reach employees.

Final salary approverPerson · Role · Group · applies now
Who approves or returns a salary line. Every approver must hold the salary-approve permission. A person who also prepares salaries may not approve their own line.
Default increase per rankpercent of the current monthly rate, per rank S to E · empty = no change
Shown on the salary sheet as Suggested % and prefills the proposed rate. HR may change any line.
Salary Deliberation stageswitch · applies to new cycles
Adds a parallel salary stage to new cycles.
Owner sees everything (testing)switch, in Visibility and Access
While on, full-access users see and approve salaries. Turn it off in a real company so only the people granted the salary permissions do.
Default discussion deadlinedays after the release opens
Empty = none; HR can type a date when opening the release.
Both the employee and the evaluator press Discussedon by default
Off: the evaluator's press is enough.
If the rank changes after Discussed, ask both to discuss againon by default
Applies at once, running cycles included.
Tip
The tutorial company sets Gerald Mendoza as final salary approver, turns Owner sees everything off, and uses the increases S 8%, A 6%, B 4%, C 2%, D 0%, E 0%. The salary tutorial shows what they produce.
Salary: approver, default increase per rank and who sees salaries
  1. 1Final salary approver: Person, Role or Group
  2. 2Default increase per rank
  3. 3Manage in Roles
7Load the evaluation form and the preset lists

Open HR → Performance → Evaluation Forms and click Load Standard CCFS. It adds the standard Career Challenge & Feedback Sheet (three targets scored by two evaluators) and the Career Design Sheet. Pressing it again never adds a form twice or brings back one you deleted. On the Preset Lists tab, load the standard lists: Competencies per job grade and Section Policies per department.

Load Standard CCFS
Adds the standard forms that are missing; a confirmation lists what it will add.
New Form / Duplicate
Build your own form, or copy one and change it. A cycle freezes the form when it opens, so later edits never change a running cycle.
Section Policies (preset list)
One entry per department: the policy the section works to this year. The section head picks it on Section setup, and target 1 must align with it.
Competencies (preset list)
The competencies a target can develop, filtered by the person's job grade.
FormVersionSections · questionsScored
Career Challenge & Feedback Sheet16 · 7Yes: 3 targets, equivalence table
Career Design Sheet16 · 35No
Evaluation Forms: the two standard forms
  1. 1Load Standard CCFS
  2. 2Preset Lists tab
8Give people the right permissions, and (optionally) load existing data

Permissions live in Settings › Roles (the user level of a role). Performance uses these:

WhoPermissionWhat it allows
Every employee, evaluator and section headPerformance access (and the HR module entry)Their own sheets, the sheets they rate, their section. Nobody else's.
Performance setup (HR Manager)Performance configuration: access, create, update, deleteCycles, forms, preset lists, job grades, Performance Settings.
Performance HR (Hana)Performance HR access and updateReads every record and acts as HR (withdraw, raise amendments, edit as HR). Never on their own record.
Salary HR (Rosa)Performance salary accessBuilds and submits the salary review.
Salary approver (Gerald)Performance salary approve; payroll contract approveApproves lines, then the new contracts.

The last item of Performance Settings is Data Load: one-time imports that bring existing records in. Each one is previewed before anything is written, and Preview and Apply stay greyed until there is something to do.

Org sections
Loads the organisation's sections from a file.
Employee grades and sections
Loads each employee's grade and section into the one grade history; the same history Organization writes.
Filled CCFS workbooks
Reads Excel evaluation sheets (one per employee) into a cycle's sheets.
Tip
Fields of each load are on Performance Data Load.
Data Load: the last item of Performance Settings

What You Have Now

Ready for the cycle: what Ante knows about the Creative Studio
Department with a headCreative Studio · Lena Vargas
People to be evaluatedMarco Reyes and six designers; Lena is the head and is not evaluated here+7
Job grades held+GS1 ×2 · GS2 ×2 · GS3 ×2 · MM2 ×1
Bell-curve guideline for 7 people (S A B C D E)→1 · 2 · 3 · 2 · 1 · 0
Standard form loaded→Career Challenge & Feedback Sheet v1
Everything the next tutorial, Run an Evaluation Cycle, starts from.

Next: Run an Evaluation Cycle. Reference pages for each screen: Organization, Performance Settings and Evaluation Forms.