ANTE User Manual

Performance Cycles

A cycle runs one evaluation form for a set of employees over its own review period — for example "Apr 2026 – Mar 2027 Evaluation", reviewing Apr 1, 2026 – Mar 31, 2027. Each cycle has its ownstages: the ones HR sets before the evaluation (for example Target setting → Mid-year, or Q1 · Q2 · Q3), then four fixed ones every cycle ends with — Evaluation, Ranking, Result talks and Closed. Every employee has one sheet in it, filled by the employee and agreed by their evaluators. Cycles don't follow the fiscal year: each one sets the period it reviews, and the form keeps no stages of its own — the cycle decides which stage each part is filled at.

Starting a cycle

+ New Cycle on the cycle page, HR's Performance Dashboard (Performance set-up permission) opens a dialog in four steps: Basics, Stages, Forms and People. Back and the step names at the top go back; nothing is saved until Create Cycle.

  1. Basics: name, review period, and which cycle to copy
    The review period starts on the day after the latest cycle's period ends and runs one year (with no earlier cycle, the fiscal year that holds today, or from the 1st of this month). A new start moves the end with it until you pick the end yourself. The name follows the period until you type your own. Copy cycle: pick a previous cycle to copy — its stages, names, forms and section mapping, with every date moved by the difference between the two periods — or Don't copy · start blank with your company's default stages (Performance Settings › New cycle defaults).
  2. Stages: the steps of this cycle, each with its deadline
    Drag a stage by its handle to reorder it, rename it, set its deadline or delete it; + Add stage adds one at the end (up to 12 before Evaluation). Agreed by says which evaluator agrees each stage with the employee. Starts here picks the stage the cycle opens at. The four Fixed stages (Evaluation, Ranking, Result talks, Closed) can be renamed and dated but not moved or deleted. A cycle may have no stages before Evaluation at all, for a company that only scores at year end.
  3. Forms: which stage each part of the form is filled at
    The evaluation form lists its sections, each with the stage it is filled at in this cycle (Any stage follows the cycle). Under the Target section are its four parts — Setting, Check-in 1, Check-in 2 and Rating; a check-in can be Not used, and Rating is always at Evaluation. The form's name is a picker of your company's evaluation forms: pick another to swap it in place (its sections start on their default stages again); the ⓘ by it says where it came from (copied from a cycle, or the company default). + Add form lists the forms by kind — the evaluation form (one per cycle), Career Design Sheets and surveys, each with the stage it is Due at — and ends with Create a new form…, which opens Evaluation Forms in a new tab.
  4. People: who gets a sheet, then Create Cycle
    Under Grades in this cycle, every job grade and No grade is ticked, each with how many people hold it today (a copied cycle starts from that cycle's ticks). Untick what this cycle does not evaluate. Evaluators come from Reports-to: the 1st is the person's boss, the 2nd that boss's boss. Evaluators go up to names the highest evaluator as the head of the person's level in Settings › Departments (Section, Department…): the 1st evaluator is the person's boss, the 2nd the boss's boss, never above that head; if the boss is that head, the evaluation ends with them and their score counts. The company default is the section level, so a section head gets no evaluator above them; a managers' cycle picks the level above, so section heads are evaluated by their department head. Under the choice, an example from real data shows who a person's evaluators would be. A boss who sits in another section is not used: the Resolution Center lists it for HR to fix the Reports-to or confirm that boss, and the summary before Open says how many people this affects. Tick Include every employee in this cycle's grades and, if needed, limit it to one unit. The summary shows the people, stages, forms and first deadline, and every stage with its date, before you create the cycle as a Draft.
Review period starts / ends*
What the cycle evaluates. Years in grade, base rank and selection are counted as of the end date. At most two years long.
Stage names
Every stage needs a name, and no two stages of a cycle may share one. The names show everywhere the cycle is: the timeline, the dashboard, the sheet's stage strip and the Target tabs.
Stage deadlines
They may never go backwards down the list; Ante says which stage is out of order and Next waits. A stage's deadline locks it from the next day (Allow late edits keeps it open). Ranking's date is a target only, and Result talks' date is the discussion deadline.
Stage left to match
If you delete a stage in step 2 that a section or a Target part was mapped to, that row turns amber in step 3 ("1 stage left to match") and Next waits until you pick a stage for it again.
Target parts in order
Setting comes first, then Check-in 1, then Check-in 2, each at a later stage than the part before it, all before Evaluation. A row that breaks the order says so under it.
Info
Example: the latest cycle reviewed Apr 1, 2025 – Mar 31, 2026 with Target setting (May 27) → Mid-year (Oct 29) → Evaluation. Copying it for Apr 1, 2026 – Mar 31, 2027 gives the same stages on May 27, 2026 and Oct 29, 2026, the same section mapping, and the name "Apr 2026 – Mar 2027 Evaluation".

The cycles list

Every cycle, past and present, is on Performance Cycles (in the Performance menu, right after Dashboard; Performance set-up permission). Cycles are grouped by year, the year their review period starts, newest first. Each year shows how many cycles it has and the most people in one of its evaluations. A year's Career Design round sits right after its evaluation cycle. The newest two years are open; older years fold to one line (cycles · people · the median rank once results are approved) with Show.

Each row shows the cycle's name and form, a state chip (the current stage while it is open, Draft, or Closed with its date), the people and how far they are (for a round: sheets and how many were submitted), and the result in one look: the S · A · B · C · D spread of a closed, ranked evaluation, or No ranking for a cycle run without the Management Evaluation stage. Open opens the cycle page described below (or the Career Design round).

The All · Open · Draft · Closed chips filter the list and show how many cycles are in each state; the Type select narrows it to evaluations or Career Design rounds. The search box finds a cycle by its name, or a person: each cycle they are in is listed with their name (and their final rank once it is released), which opens their sheet. + New Cycle is at the top right; the dashboard keeps its own New Cycle shortcut.

The cycle page

HR's Performance home is the cycle page: HR › Performance › Dashboard shows the open cycle in place (the newest one when several are open, else the latest cycle). Select cycle next to the title switches to any other cycle, newest first with its status and period. With no cycle yet, the Dashboard says so and offers New Cycle. A cycle opened from History shows the same page with ← Back.

At the top right: New Cycle, Open Cycle (a Draft only) and More ▾, which holds Performance Settings, Add Employees and History. In Add Employees, only the grades evaluated in each cycle (Performance Settings › General) get a sheet: someone at another grade, such as MG and above, shows as an evaluator gap instead.

A Draft cycle warns when the Section level leaves people with no section head: "N people have no section head at the current Section level", with each section and why (no one, or more than one person, holds its top role) and the people in no department. The same lines show in the Open the cycle? confirm. It is a warning only: you can still open the cycle. Fix the top role in Settings › Organization, or change the Section level under Performance Settings › People and Org; the warning updates as soon as you do.

The tabs are Progress (where the cycle is and who is behind), Section setup (the answers given once per section), Reports (the summary by grade and rank) and Cycle settings (deadlines and the cycle's own choices).

Tool row
Under the header, on every tab: Resolution Center · N (the cycle's open issues), then the Evaluation Center's tools — Bell Curve, Promotion, Score Range and Download, each available once its stage allows it.
Status line and stage strip
Above the tabs, so they show on every tab: the cycle's status and % filled, and every stage with how many sheets are done (Career Design counts a sheet once it is submitted, for example 0/31).
Move to next stage
Moves the whole cycle and always asks first, naming the next stage and how many sheets have not agreed the current one; point at the button to see the next stage. At Result talks the button is Close Cycle instead (it asks first too).
A stage's table
Click a stage on the strip to see everyone at that stage: Employee, Section, Grade, both evaluators and where each person is (Not started, Open, Submitted or Agreed; for Career Design: Preparing, Submitted, Confirmed or Approved), with the date they last moved. Search by name, code or section; tick people (or Select everyone not done) and Remind selected, or remind one person from their row. All stages (or the same stage again) closes the table.
Progress → Evaluation Center
An opened cycle shows the Evaluation Center fixed to this cycle: the same views, filters, columns and per-row Remind and Download. Its Approvers view replaces the old People and Org tab: frozen sections, evaluator chains and the changes from Settings since the cycle opened (the header chip "N changes from Settings" opens it with the changes list). A Draft keeps the participants table, where people are added before the cycle opens.
Reports
The summary of ranks by job grade, as in the Summary sheet: per grade, each rank (S–E) with its points and the bell-curve guideline, then for the company and each Division › Department (or each Section, or each Job grade — pick in Columns) the number of associates, the total points and the average point. Pick which rank it counts: SM/GM (default), MG or the Final (BOD) rank. A count above the guideline is highlighted. Until sections are ranked it says so. Nothing is stored: it is worked out from the Evaluation sheet.
Section setup
The answers given once per section (for example the priority implementation item and the section policy), entered by HR or the section head. When the form has no such questions, the tab says so.
Cycle settings → Review period
The period the cycle reviews. HR can change it while the cycle is a Draft, and while it is open until the first evaluation is agreed or the Evaluation sheet is generated (years in grade are counted as of its end); after that it reads only, with the reason ("the Evaluation sheet has been generated", "an evaluation has been agreed", or the cycle is closed). Change both dates, then Save period (or Discard). Stage deadlines far outside the period are listed as a warning, and so is another evaluation cycle whose review period overlaps this one ("Overlaps another evaluation cycle", with its name and period) — it still saves, but each period should be reviewed once.
Cycle settings → Stage settings
Per stage with a handshake: the deadline (end of that day), "Allow late edits" and how many sheets are agreed, submitted, in progress or not started. Edit stages and Edit forms open the same editors as New Cycle — see below.
Cycle settings → Sections scored this cycle
The scored sections of the cycle's form. Untick one to leave it out for this cycle only; the remaining weights rescale to 100% and each section says what it counts now (for example Target Setting 60% and Final Interview 40%, with the Final Interview left out → Target Setting counts 100%). At least one section stays. It is fixed once an evaluation in the cycle has been agreed.
Cycle settings → Grades in this cycle
One tick per job grade, with how many people hold it today, plus No grade. They decide who Include every employee in this cycle's grades, Add employees and Data Load take for this cycle; a person picked by name always joins. Narrowing the list never removes a sheet already in the cycle. Save applies the change; Discard puts back the saved ticks. A cycle created before 5 Nov 2026 starts from the grades the company ticked then.
Cycle settings → Evaluators go up to
The head of the person's chosen level in Settings › Departments is the highest evaluator in this cycle (copied by Copy from a previous cycle; the company default follows the section level set under Performance Settings › People and Org and is fixed when the cycle opens); an example from the cycle's own people shows the chain the choice gives. A Reports-to evaluator who heads a unit above it is left off the sheet; the head of the person's own unit always stays, and an evaluator the form names (for example Head of my Division) is never left off. A person with one evaluator — one left after the stop, or a boss who has nobody above them — has them as the final (2nd) evaluator, so their score counts; the 1st slot stays empty. The Resolution Center lists a sheet with nobody left. A change applies to evaluators worked out from then on (people added, Re-assign); sheets keep the evaluators they have. Cycles created before 5 Nov 2026 stop at the top level, as before.
Cycle settings → This cycle's settings
Copied from Performance Settings when the cycle was created: both the employee and the evaluator press Discussed, the rounding of section promotion shares, and the default discussion deadline (days after the release opens; empty = no default). Each change saves at once and applies to this cycle only. Each line shows the company default; when the cycle differs, Use Company Default takes the company's value.
Cycle settings → Behind from N days
A sheet with no submission counts as behind from this many days before the stage deadline (0–90).
Cycle settings → Split the company promotion quota across sections by headcount
How a grade's promotion number reads in a section or department view — see below. New cycles start from the company setting (More ▾ › Performance Settings). Once the Evaluation sheet is approved, changing it asks first, because it changes every section's promotion numbers.

Editing stages and forms

On the cycle page, Cycle settings → Stage settings has Edit stages and Edit forms (Performance set-up permission). What can still change depends on where the cycle is, so sheets already written are never cut off:

Draft
Everything: add, delete, reorder, rename and re-date stages; swap or re-map forms.
Open
Rename and re-date any stage. Add a stage only after the current one. Delete or move only a stage after the current one that no sheet has data in. Agreed by is fixed once a sheet has data at that stage. In Edit forms the evaluation form stays, and a section or Target part can move only between stages after the current one. A locked control shows a 🔒 — point at it for the reason.
Closed
Names only.
Tip
A renamed stage shows its new name at once on the timeline, the dashboard and every sheet of the cycle.

Performance settings

More ▾ › Performance Settings on the cycle page opens the Performance Settings page; its General section holds the company-wide choices (Performance set-up permission to change them):

Split the company promotion quota across sections by headcount
The default new cycles start from (off unless set).
Every employee can use their own evaluations
Off by default. On: every employee can open My Performance and their own CCFS and Career Design sheets without a Performance permission on their role — never anything HR-side (cycles, set-up, other people's sheets). It applies from each person's next sign-in.

Reminding people

With the Performance HR (act) permission, every member who is behind has a Remind button, each section a Remind Section button, and Remind Everyone Behind above the table reminds everyone behind at once (off when nobody is behind). A reminder goes to whoever the sheet waits on — the employee while their stage is open, the agreeing evaluator once it is submitted — as an Ante notification, and is written on the sheet history. The person's home dashboard shows a Performance card, highlighted for a week after a Remind.

Who a Remind reaches
The sheet is…Reminded
Open (not submitted)The employee
SubmittedThe evaluator who agrees this stage
Agreed, or waiting on HR, or your own sheetNobody (counted as skipped)

Withdrawing someone

  1. Open the ⋯ menu on the member's row and click Withdraw
    Or decide it in the Resolution Center when Ante sees they left the company or moved section.
  2. Pick a Reason: Resigned, Transferred or Long leave, and add a note
    They leave every count, the progress monitor, the Evaluation sheet and the bell curve; their sheet turns read-only.
  3. Undo from the Withdrawn list
    Everything they entered comes back.
Tip
Withdraw is refused while the Evaluation sheet is approved — reopen it first.
Tip
Remove is only for a sheet nobody has answered yet; once a sheet has answers or is agreed, Remove is hidden and Withdraw takes them out instead.

Opening an employee's sheet

Click a member's row on the cycle page to open their CCFS sheet (the whole row opens it, one arrow on the right). The breadcrumb returns to the cycle page. A sheet opened from the Resolution Center or from your section returns there; opened any other way, it returns to My Performance.

The sheet uses one name per role on every field: Employee, and for the evaluators the names your company gave them on the evaluation form (for example "Supervisor"), or 1st evaluator / 2nd evaluator when the form leaves them empty (the default).

The Evaluation sheet

Info
Since 5 Nov 2026 the Evaluation sheet is part of the Evaluation Center: the cycle page's Open button lands there, on that cycle, and Generate is now Start Ranking in its header. The rules below are unchanged.

Generate creates the sheet and starts Ranking. It works only when everyevaluation in the cycle is agreed. Otherwise it is refused, and the sheet page lists who is missing and how far each one is (not submitted, or submitted but not agreed); click a name to open that person's sheet.

Info
There is no override. Finish the missing evaluations, or, for someone who left or is on long leave, use Withdraw (see Withdrawing someone): they leave the counts and no longer hold Ranking up. Refresh follows the same rule.
Filters
Section, grade, selection, search and "rank differs" sit above the grid; each dropdown shows its whole value.
View only
Shown once on the totals line when you cannot change any row on screen; rows you can change have a Save button.
Bell curve guideline
The share of people per rank (default S 10 · A 20 · B 40 · C 20 · D 10 · E 0, always totalling 100) and when a cell is flagged. Set it on the evaluation form (Evaluation Forms → the form → Bell curve guideline); a cycle uses the form it was created from. Every change is recorded in the Audit Log.
Columns
Shows or hides whole column groups, named as on the grid: Standard information, HR input, Manager input (the manager's score, rank, comment and promotion columns) and Deliberation (SM/GM and final rank, and Result sharing). The employee column always shows. Ante remembers your choice on this browser.
Grid height
The grid fills the page height; scroll inside it and the column headings stay on top.
Review period
At the end of the totals line, for example "Review period: Apr 1, 2026 – Mar 31, 2027". Years in grade, base rank and selection are counted as of its end; change it on the cycle's Settings tab. Earlier results in the rank history are headed by their review period (for example "Apr 2025 – Mar 2026"), oldest first.

Releasing results

Once the deliberation is approved, HR opens the release. Each section's results wait as Not yet shared in the Result sharing column. Manager and employee both confirm the talk, then the manager publishes. After the discussion deadline, HR decides the rest in the Resolution Center.

The bell curve

Open Full View on the Evaluation sheet's bell curve card opens the bell curve page: the rank distribution of the cycle's Evaluation sheet as saved. Managers reach it from the Evaluation Center; it shows only the rows they may see.

Scope
The whole company (HR) or any unit you belong to. The hint says how many employees are counted.
Rank column
MG rank, SM/GM rank or Final rank. Everyone else sees the column the current deliberation stage reads; HR can switch it.
Grade × rank matrix
Per job grade: the count per rank against its guideline (from the form's bell curve guideline), ranked and unranked people and points. A cell over its guideline is flagged. Guidelines round up per rank, so together they can be more than the headcount — a guide, not a limit.
Budget note
Free text shown beside the curve, for example the increase budget for this review period (up to 500 characters). HR edits it; nothing is computed from it.
Rank percentages
The share of the ranked employees per rank, per job grade, with the count under each share.
Download
Saves the report as an Excel file.
Tip
To try rank moves before saving them, use What if on the bell curve card of the Evaluation sheet itself — the full page shows saved ranks only.

The promotion quota in a section view

Info
A grade's promotion ratio is a company number. Off, a section sees it for information (a count as is, a percentage worked out for the company headcount). On, a count is shared by headcount and a percentage follows the section's headcount.
Example: 2 a year for GS1, 3 people in section A and 1 in section B
SettingSection A showsSection B showsHR company view
Off (default)Company: 2 (for information), no over / underCompany: 2 (for information)2, with over / under
OnSection A's share: 2 of the company's 2 (3 of 4 people), with over / underSection B's share: 1 of the company's 2 (1 of 4 people)2, with over / under

Each share is rounded up to whole people (2 × 3 ÷ 4 = 1.5 → 2), so the shares can add up to more than the company number. Saving the setting says "Promotion quota setting saved".

Tip
Step by step with a worked example: Run an Evaluation Cycle. Probation or mid-year review without ranking: Run a Probation Review.

How It Connects

Set up first

  • Evaluation Forms — a cycle runs one evaluation form and copies it when it opens.
  • Job Grades — CCFS grades decide who joins a cycle.
  • Resolution Center — the situations a cycle raises for HR (evaluators, withdrawals, deadlines, the quota split).

Feeds into

  • Evaluation Sheets — employees, evaluators and section heads fill in and follow the cycle's sheets.
  • Access Gates — who may see the result marks of the group discussion.