ANTE User Manual

Promotion

The Promotion view counts, per job grade, who sits in each selection, who their managers recommend for promotion and what the grade's promotion ratio allows. It is a read-only report on a cycle's Evaluation sheet: nothing is changed or approved here. Open it with the Promotion button in the toolbar of the Evaluation Center (it opens as a panel above the grid; the Section filter sets its scope), or from the Promotion card on the cycle page (Performance Cycles), which lands there. Years in grade and selections are counted as of the end of the cycle's review period, shown in the header (for example "Review period: Apr 1, 2026 – Mar 31, 2027").

Info
The counts come from the cycle's Evaluation sheet. Until the sheet is generated the page says "The evaluation sheet is not generated yet"; use Open the Evaluation Sheet, generate it, then come back. HR sees the whole company and any unit; a manager sees only the units of their own lineage. A person with no rows on the sheet gets "No rows for you".

The page

Open the Evaluation Sheet
Back to the cycle's Evaluation sheet, where the recommendations are entered.
Bell Curve
Opens the cycle's rank distribution.
Download
Downloads an Excel file with a Grades and a People worksheet for the scope on screen. Disabled until the sheet is generated.
Scope
Whole company (HR) or a unit of your lineage. The line beside it says how many employees are in the scope and when the sheet was generated.

The summary tiles

In a selection
Employees in the scope who sit in a 1st, 2nd or 3rd+ selection.
Recommended
Employees whose manager recommends promotion.
Allowed by ratio
The grade table's Allowed column added up, with the grades' over / under added up ("over the ratio", "under the ratio", "on the ratio"). Recommendations in a grade with no ratio do not count against it. Reads "No ratio set" when no grade has a ratio, and "Company allowed (for information)" in a section view with the split off.
Fast promotion
Recommended employees whose promotion type is Fast.
Next grade set by HR
Employees for whom HR has entered a next job grade on the sheet.

By job grade

One row per job grade that has people in the scope, highest grade first. Click a grade to filter the people below to that grade; click again, or Show all grades, to clear it. A grade code that is not in Job Grades appears as its own row marked Unknown grade so nobody is dropped from the totals.

Job grade
The grade code and name. The Assessment chip means a move up from this grade needs the Promotion Assessment Activity: the grade has a promotion method, or the next grade is in another job stage.
Headcount
Employees of this grade in the scope.
1st · 2nd · 3rd+ · Below
Per selection: headcount, then · how many of them are recommended. "Below" is people not yet in a selection.
Recommended
Recommended in this grade.
Allowed
What the grade's ratio allows: a count ("2 a year"), a percentage worked out for the headcount ("30 % → 1"), or a dash when no ratio is set. A section or department view reads differently — see below.
Over / under
Recommended compared with allowed: "Over by 1", "Under by 1" or "On the ratio". Over is highlighted as a warning. Hover a column heading to see what its code means. The ratio is a reference line, never a cap: nothing stops a recommendation.
Fast
Recommended with promotion type Fast.
Track M / T
Recommended people on the Management and the Technical track.
Example: company view, 8 employees
GS2: 4 people, ratio 2 a yearselection 1st 2 · 2 recommended, 2nd 1 · 1, 3rd+ 1 · 03 recommended
GS2 alloweda count is the same for any headcount=2
GS2 over by=3 − 2 = +1
GS1: 4 people, ratio 30 %selection 1st 2 · 1, 2nd 1 · 1, below 1 · 02 recommended
GS1 allowedrounded to whole people=30 × 4 ÷ 100 = 1.2 → 1
GS1 over by=2 − 1 = +1
TilesIn a selection 7 · Recommended 5 · Allowed 3 · +2 over the ratio
GS2 is marked Assessment because the next grade (Manager 1) is in another job stage.

Section and department views

A grade's promotion number is a company number, so a section or department view depends on the cycle setting Split the company promotion quota across sections by headcount (see Performance Cycles). Off: every grade with a ratio shows the company figure for information, with no over / under (a percentage keeps its own %, worked out for the company headcount). On: a count becomes the unit's share; a percentage follows the unit's headcount. The company view is never changed.

Example: Section A (2 GS1 and 3 GS2 of the 8 employees; 4 are recommended in it)
Split settingGS2 AllowedGS1 AllowedAllowed tile
Off (default)Company: 2 (for information)Company: 30 % → 1 (for information)Company allowed (for information): 3, no over / under
OnSection A's share: 2 of the company's 2 (3 of 4 people), over by 130 % → 1, on the ratio3 (GS2 2 + GS1 1), +1 over the ratio
The share is the company count × the unit's headcount ÷ the company's headcount, rounded up to whole people: 2 × 3 ÷ 4 = 1.5 → 2. Shares can add up to more than the company number.
Tip
If the organisation chart is incomplete (someone has no section) the Resolution Center raises it before the split can be trusted.

People

Everyone in the scope who sits in a selection or is recommended. Recommended only keeps just the recommended ones. People are ordered by grade (highest first), then 1st, 2nd, 3rd+, below; then years in grade (longest first), then name.

Employee
Name and employee code.
Section
Section, else department, else division.
Manager
The employee's manager.
Grade
Current job grade.
Years in grade
Years in the current grade, as on the Evaluation sheet.
Selection
1st, 2nd, 3rd+ or Below 1st. For someone below the first selection it reads "reaches it <date>", the day they reach it.
Rank
The best rank available — final, else SM/GM, else manager — with the column it came from.
Rec.
A tick when the manager recommends promotion.
Type
Promotion type the manager chose (for example Fast).
Track
Management or Technical.
Recommended JG
The job grade the manager recommends.
Next JG (HR)
The next job grade HR entered.
Reason
The manager's reason.
Assessment
The Promotion Assessment Activity is needed: the grade's rule, or the recommended / HR next grade is in another job stage than the current one.
Example: when does Employee 4 enter the 1st selection?
Job grade GS1, grade since1 April 2026
Years in grade needed for the 1st selection2
Date reached (grade since + 2 years − 1 day)=31 March 2028
Shown as=reaches it Mar 31, 2028
Years in grade are counted as of the review period's end (Mar 31, 2027 here), so Employee 4 is below the 1st selection this cycle and shows “reaches it Mar 31, 2028” until they sit in a selection; people in neither a selection nor recommended are not listed.

Reading it step by step

  1. Generate the Evaluation sheet
    Open the evaluation sheet and generate it so the counts exist.
  2. Pick the scope
    Company for HR, or a unit.
  3. Read the grade table
    Look for grades marked over by more than zero, then click the grade to see the people.
  4. Download
    Share the Excel file when needed.

How It Connects

Set up first

  • Performance Cycles — the cycle, its Evaluation sheet and the section setting for splitting the company promotion count.

Gets its data from

  • Performance Data Load — grades and grade-since dates imported there drive years in grade and the selection years.

Feeds into

  • Resolution Center — flags a quota split that cannot be worked out because the organisation chart is incomplete.