ANTE User Manual

Resolution Center

Each HR sub-module has its own Resolution Center listing the situations HR must decide there: HR → Performance → Resolution Center and HR → Hiring → Resolution Center. Each one shows only its own kinds of situation, and the number on its menu item is how many wait there. Ante works the situations out from the live data each time the page opens. Nothing changes on its own: every change is a button HR presses, every press is recorded with HR's name, and it goes to the Audit Log (and to the sheet's history when there is a sheet).

Info
The Resolution Center permission opens the page. Each kind of situation also needs the permission of the record it is about: Performance situations are listed for Performance HR (read) and their buttons need Performance HR (act). A button you may not press is shown greyed out with the reason. Nobody decides a situation about their own sheet.

Reading the page

The situations are one table: who it is about, the problem, the change, the cycle and the buttons. The same situation repeated in several cycles — the same people, the same change, the same fix — is one row, so one decision covers all of them.

Kind tabs (All · Evaluator changed · …)
Above the table: show one kind of situation; the number on each tab is how many rows wait.
Cycle
Performance only, beside the tabs: show one cycle.
Who
The person (click the name to open their sheet; Back returns here), or "3 people" with their names when the situation is about several.
Problem
The kind of situation; point at the ⓘ for the full sentence.
Change
What the record says now, struck through, and what it should be (at most two fields; "+2" lists the rest).
Cycle column
The cycle, or "7 cycles" when the row covers several — point at it for their names.
Buttons
One small button for the usual fix (Re-assign, Update grade, Move, Set in org chart ↗) and ⋯ for the other choices and Open sheet.
Info
On the cycle page, Resolution Center · N in the tool row opens this page for that cycle; N counts the same rows as To fix + Behind here.

Deciding a situation

  1. Press one of the situation's buttons
    A dialog says exactly what will happen. On a row that covers several cycles, the decision applies to each of them.
  2. Give what the button asks for
    Some buttons ask for a reason (Keep current), a date (Extend) or why a person is withdrawn.
  3. Confirm
    The change is made and recorded. If someone else changed the situation in the meantime, Ante refuses and asks you to reload, so nothing is decided on stale information.
Tip
Long leave does not show in HR records, so HR can also withdraw someone straight from the cycle page (the withdraw icon on their row); the withdrawn people are listed there under Withdrawn with Undo.
Tip
A Keep decision closes the situation until it changes again. If the same person's supervisor changes once more, the situation comes back for a new decision.

Performance › Resolution Center

Open it from HR → Performance → Resolution Center, or from Resolution Center · N in the cycle page's tool row.

Show picks All, To fix (records to correct, one row per person) or Behind (work past its deadline, one line per kind with Remind all, List and Open). Below Behind, In progress · N not finished lists the same kinds of work whose deadline is still ahead — for example "31 Career Design sheets not finished" — with the same buttons. It is never counted in the To fix / Behind numbers or the cycle page's badge: it only counts once its deadline has passed.

What each situation means and its buttons
SituationWhen it appearsButtons
Evaluator no longer matchesAn open cycle sheet's 1st or 2nd evaluator is not who the "Reports to" line or the section head gives today (for example the supervisor changed mid-year).Re-assign evaluators (everything entered on the sheet stays; the history notes old → new) · Keep current (reason)
Evaluator has leftAn open cycle sheet's 1st or 2nd evaluator has left the company. (A sheet never has the employee as their own evaluator, or one person in both slots.)Re-assign evaluators (from today's records; everything entered stays) · Keep current (reason)
Reports-to in another sectionAn open cycle sheet's person reports to someone who sits in another section of Settings › Departments (and heads nothing above them). That boss is not used as an evaluator — the section head does not stand in either — until HR decides. The card names the person, their section and the boss. Before a cycle opens, its Open confirm says how many people this affects.Fix Reports-to (opens the employee record) · Confirm that boss (they become an evaluator of this sheet; noted in the sheet history)
Input from someone no longer in the cycleSomeone was taken out of a cycle while their Evaluation sheet row held manager input, a rank or HR input. Refreshing the Evaluation sheet is refused until each such card is decided. The card names the input and who entered it.Archive their input (the row leaves the sheet; everything it held is kept in the Audit Log) · Restore to cycle (they take part again and the row stays as it is; not offered once they have left the company)
Approved sheet differs from HR recordsThe Evaluation sheet is approved (so it is no longer refreshed) and an employee's section or grade in HR records changed since: one situation per group. The card names the field that differs (e.g. "Years in grade differs from HR records").Only the fields that differ are shown, in bold (e.g. "Years in grade: 3 → 4"). Update <that field> — or Update section / Update grade when several differ (copies only those columns onto the row, noted in the row history; ratings, ranks and scores never change) · Keep as approved (reason)
Not discussed by the deadlineThe discussion deadline of a released cycle has passed and a result was not discussed by BOTH the manager (Mark discussed) and the employee (We Discussed My Result on My Performance). Before the deadline only discussed results can be published, HR included.Publish with a reason (the employee sees the result; the reason is on the release history and the Audit Log) · Extend deadline (a new date for the whole cycle, today or later)
The cycle has no section for themA participant of an open cycle has no section in the cycle, but the HR records place them in one.Use HR records' section (the main button: they count in that section; the sheet history notes it) · Withdraw (only if they really left or moved) · Keep without a section (reason)
No longer in the sectionA participant of an open cycle left the company, or HR records now put them in another unit than the cycle has for them.Withdraw (Resigned / Transferred / Long leave, with an optional note: they leave every count, the progress monitor, the Evaluation sheet and the bell curve; the sheet turns read-only; Undo on the cycle page puts them back) · Keep in the cycle (reason)
Quota split with an incomplete org chartA cycle splits each grade's company promotion count across sections by headcount, but someone has no section, or their section does not reach a division.Open org set-up (finish the sections → departments → divisions and the assignments) · Turn split off (section views then show the company number for information, with no over / under)
Career history changed after submitA Career Design Sheet keeps the career history as the employee submitted it; HR records (section, grade, terms) changed since, in an open round.View current (the sheet shows "History changed after this sheet was submitted" with both versions) · Noted (reason; the sheet stays as submitted)
Example: a supervisor changed in July
1st evaluator2nd evaluator
Now (on the sheet)Ana CruzBen Reyes
Per HR recordsCarl LimBen Reyes
After Re-assign evaluatorsCarl LimBen Reyes

Hiring › Resolution Center

Open it from HR → Hiring → Resolution Center. Unlike Performance it is one flat list headed To resolve with the number of cases in brackets, no kind tabs and no cycle filter. Each row is one concrete case: the name (a person, a posting or a request), the record code, a short badge for the problem, and a line of detail. The most urgent come first. The search icon opens a box that finds a name, posting or problem. Click anywhere on a row (or Tab to it and press Enter) to open the case with all its facts; the row's own button and ⋯ never open it. An empty list reads Nothing needs attention.

Info
Each kind of case shows to the people who can see the records it is about, for example offer cases to people with offer access, cutoff cases to people with applicant and posting access, request cases to people with Manpower Request access, and the medical case to people with Access Gates or Hiring settings access. Seeing a case is not the same as being able to fix it: a button that needs a permission you do not have (for example Create offers, Update applicants or Update postings) is greyed out with the reason.
What each situation means and its buttons
Situation (badge)When it appearsButtons
Medical step with someone not on the gate (Not on the gate)An open Medical result step of a hiring workflow is assigned to someone who is not named on the "Medical results" access gate, so they cannot see or record the result.Reassign step (pick someone on the gate; needs Hiring settings access, and the step must have started) · Open Access Gates (name them on the gate) · Keep as is (reason; needs the Access Gates Update permission). Keep as is is not a one-day Ignore: the case stays closed for good while the same person holds the step.
Offer past its answer-by date (No reply to offer)An offer was sent and has had no reply for 3 days (the company default), or it ran out with no answer.Follow up (opens the offer on the application record) · Send reminder (a reminder to the candidate is stored to be sent, once a day at most; disabled when the candidate has no e-mail address) · Extend the answer-by date · Withdraw offer (reason) · Ignore (reason). A ran-out offer has Follow up and Ignore only: re-issue it on the record. The buttons that change the offer, and Ignore, need the Create offers permission.
Stage past its cutoff with nobody decided (Cutoff passed)A published posting's stage is past its cutoff and applications are still waiting to be moved on or rejected. Nothing moves by date: HR decides. Offer stages are covered by the offer case.Open stage · Extend the cutoff (a new date; needs Update postings) · Close and move them on (Application form stage) or Mark the rest not selected (anyone with an offer out stays; needs Update applicants) · Ignore (reason)
Approved request waiting for a job posting (Request waiting for a posting)An approved manpower request has had no job posting for the number of days set in Hiring Settings › Manpower requests (7 by default; empty means never). Needs Manpower request access.Create job posting (opens the new posting filled in from the request; needs Job Postings Create) · Open request · Ignore (reason)
Approver or interviewer has left (Person left)An interviewer of an interview not yet held, or an approver at the level an offer or posting is waiting on, has left the company.Interviewer: Replace on panel (someone else with interview access) · Remove from the panel · Open the interview · Ignore. Approver: Replace (opens the posting's approvals) · Ignore.
Hire starts soon, not promoted yet (Not promoted)An offer was accepted, but the hire is not an employee yet. The row says when they start, or that they started days ago.Promote to employee (opens the offer on the application record) · Ignore (reason)
Possible duplicate candidate (Duplicate)Two candidate records share the same phone and nobody has linked them or said they are different.Review match · Not the same (the suggestion is dismissed for good) · Link as same person (both records are linked as one person) · Ignore (asks a reason). All but Review match need the Update applicants permission.
Tip

Ignore (it always asks a reason) hides a case for today only. If it is still true tomorrow it comes back. The medical case's Keep as is is different: it is permanent while the same person holds the step. Every button press is recorded with your name and goes to the Audit Log.

Payroll › Resolution Center

Open it from HR → Payroll → Resolution Center (Payroll Center access). It lists payroll situations to clear; they have no buttons that change anything and clear themselves once payroll moves on.

Info
Payroll staff see these situations only when their user level holds Resolution Center access as well as Payroll Center access; with Payroll Center alone the page stays empty.
What each situation means
SituationWhen it appearsWhat to do
Active contract not switched yetA new contract (for example from a salary review) has started, but an earlier payroll period of that person is still open, so their active contract stays on the old one.Open Payroll Center and post or close that period; the contract then switches and the situation clears.

How It Connects

Set up first

  • Access Gates — the other HR tool for sensitive information (who may see what).

Gets its data from

  • Manpower Requests — an approved request with no posting after the reminder days appears here.

Feeds into

  • Recruitment and Offers — most buttons open the posting, stage, application or offer where the case is fixed.