ANTE User Manual

Payment Lists

A payment list collects the payment requests that fall due for one pay date, so they can be approved and paid together. There is one list per pay date. Each request keeps its own approval: the list is where its approvers approve them, a group at a time.

Opening Payment Lists

In Treasury, open Payables and choose Payment Lists.

The Four Tiles

Next pay date
The next pay date of the company's payment cycle.
Cut-off
The day that pay date's list is cut off and drafted.
Payables waiting
How many payment requests would be collected for that pay date today, and their total.
Lists for approval
How many lists are waiting on an approver.

When no payment cycle is set up, the tiles show a dash and a button opens the Payment cycle setting.

Reading the List

Use All, Open and Closed to narrow the list. Click a row to open that payment list.

List
The list's reference, for example PL-202611-001.
Pay date
The pay date the list is for.
Cut-off
The day the list was cut off.
Status
Where the list is; see the statuses below.
Lines
How many payment requests are on the list. Lines on hold are not counted.
Total to pay
The lines' amounts after withholding tax.
Prepared by
Who drafted the list. Drafted automatically means Ante drafted it on cut-off day.
Approved by
Who approved the list's last waiting request, which made the list Approved. Empty until then.

List Statuses

StatusMeaning
DraftBeing prepared. Lines can be added, removed or put on hold.
For approvalSent, and waiting on an approver. It cannot be edited.
Sent backAn approver returned it with a note. It can be edited and sent again.
ApprovedApproved, and ready to be paid on the pay date.
ReleasingPayment has started and not every line is paid yet.
ReleasedEvery line is paid.
ClosedFinished. Lines that were not paid went back to the payables waiting for a list.
CancelledA draft that was deleted, or an approved list cancelled before anything was paid.

Drafting a List by Hand

On cut-off day Ante drafts the list by itself and tells the people named in the payment cycle. Use Draft a List when the company has no payment cycle yet, or after a draft was deleted.

  1. Click Draft a List

    The button is at the top right of the Payment lists page.

  2. Fill in the form

    Choose the pay date and what to collect, as described below.

  3. Click Draft the List

    The new list opens as a draft. If a list already exists for that pay date, the reason is shown in the dialog and nothing is drafted.

Pay date*
The pay date the list is for. It starts at the next pay date of the cycle and cannot be in the past.
Collect the payables waiting for this pay date
Ticked by default. Untick it to start with an empty list and add lines yourself.
Notes
A note kept with the list. It shows under General information on the list.

Working on a Draft List

Open a list in Draft. General information shows its pay date, cut-off, who drafted it and when, and its notes. The tiles show the total to pay, what is on hold, and how many lines are flagged. When a line has withholding tax, a tile shows the tax kept back and the lines show Withholding and To pay beside Amount.

On This List shows the lines grouped by the fund account they are paid from, with each account's balance today and by how much it is short, for people who may see fund balances. Lines with no fund account yet are grouped under No fund account chosen.

Hold
Keeps the line on the list but out of its total. A reason is required. Take Off Hold puts it back.
Remove
Sends the line back to the payables waiting for a list. Nothing is deleted.
Change the fund account
The bank icon on a line chooses the fund account it is paid from.
Change the fund account for a whole group
The button on a group's heading chooses one fund account for every line in that group in one go.
Flags
Overdue (due before the pay date), No due date, and New payee (never paid before).

A line carries its payment request's full amount: amounts cannot be edited on a list. Not on This List shows approved payables that are not on the list, each with the reason, and Add to List. Add All Due by the pay date adds everything due on or before it. This part needs access to payment requests.

Tip

To throw a draft away, choose Delete This Draft under More. Its lines go back to the payables waiting for a list.

Sending a List for Approval

Click Send for Approval on a draft. Sending needs at least one line that is not on hold, and a fund account on every line; until then the button is off and a line on the page says why. Lines on hold are not sent. The person who sends a list cannot approve it.

Note to the approver
An optional note that goes with the list, up to 1,000 characters. After a send-back it is Your reply to the approver, and the approver's note is shown above it.

Ante checks each line again as it sends. If a line was paid or withdrawn meanwhile, the list is not sent and the changed lines are named, so you can review and send again. Any other refusal, for example that nobody is set up to approve, is shown in the dialog in the system's own words.

While a list is For approval it cannot be edited. A person who may approve payment requests opens it and clicks Review for Approval. The requests are grouped by fund account, and each line says whether it is theirs to approve and, if not, why. One press approves the requests of a group that are theirs; lines can be left out first, with a reason, and go back to the open requests. A request that is someone else's to approve stays on the list for its own approver, so several approvers can each approve their part. The list turns Approved by itself once nothing on it waits.

The approver can also Send Back the whole list with a note. A list that was Sent back shows the approver's note at the top and can be edited and sent again. Take Back under More makes the list a draft again. Either way, the requests already approved stay approved.

Tip

History at the foot of the list shows who did what and when: drafted, lines added or put on hold, sent, sent back, approved, with the notes that were written.

Release Day

On the pay date, open the Approved list and click Release Payments. Ante asks first. Each line is then paid as its own payment request, one at a time: the money leaves the line's fund account and its journal entry is posted. The page follows the release by itself, line by line.

Released
The payment went through. The row shows when.
Not released
The payment did not go through. The row shows the reason in a sentence, for example that the fund account does not hold enough, and how many times it was tried.
Being paid · Waiting
The release is running and has not reached this line yet.

A payment that fails does not stop the rest. While some payments are not released and nothing is running, the list's status reads Partly released, or Not released when none went through. When a payment was left unfinished, it reads Payment not confirmed until that payment is resumed with Resume Release. After the cause is fixed (for example, the fund account is funded), click Try Again: only the payments that were not released are tried. Payments already released are never paid twice.

Sometimes Ante answers that a release is still running, or asks you to try again in a moment. Wait a few minutes (15 at most) and click Try Again once more. Nothing is paid twice in the meantime.

Below the payments, Left Out by the Approver shows the lines the approver left out, each with the reason. Those lines are not paid from this list.

When the approver left lines out, a line near the top of the list says how many, for how much, and who left them out. Under For on each line, the payment request's memo is shown when it has one.

Before releasing, the question names any fund account that is short today and by how much, for people who may see fund balances.

If a payment still reads Being paid while no release is running, the page says so and shows Resume Release on that row to people who can release. Ante checks whether the payment went through and tells you; nothing is paid a second time. The row then shows how it ended: Released, or Not released, which can be tried again. Close List stays off while a payment still reads Being paid.

Tip

An approved list that has not been released yet can be cancelled with Cancel List under More; a reason is required. Its payment requests stay approved and go back to the open requests, to be collected by the next list: each approval belongs to the request, not to the list. After the cancel, the page names them by payee and amount.

Closing a List

Click Close List once the release has run and at least one payment was released. The dialog says how many payments were released and for how much, and names every payment that was not; those go back to the payables waiting for a list and are picked up by the next one. You can add a note. A closed list cannot be released again.

How It Connects

Set up first

  • Payment Cycle — the cycle gives each list its pay date and cut-off, and drafts the list on cut-off day.

Gets its data from

  • Request for Payment — a list collects the payment requests due by its pay date; each line is one request, in full, approved on the list by its own approver.